2017–2019 Audi A5 B9 S Line / S5 B9 One-Piece Full-Width Carbon Fiber Front Lip

Product specifications

Give the front end of your Audi a lower and more defined appearance with this one-piece full-width carbon fiber front lip. It is designed for listed 2017–2019 Audi A5 B9 S Line and Audi S5 B9 models equipped with the matching factory front bumper shown in the product images.

Unlike separate corner extensions or a universal flat splitter, this front lip uses one continuous molded profile across the lower bumper. The raised outer sections follow the bumper corners while the center section creates a connected, full-width appearance.

One-Piece Full-Width Front Lip Design

• Single continuous front-lip structure
• Full-width profile across the lower front bumper
• Integrated raised sections at both outer corners
• Vehicle-specific shape for the matching Audi B9 bumper
• Add-on styling component rather than a replacement bumper

This product should not be confused with a multi-piece corner-lip kit, a complete front bumper, or a universal front splitter. Its one-piece construction is the primary design difference of this specific front-lip style.

Carbon Fiber Construction and Gloss Finish

The visible surface features a woven carbon fiber pattern with a gloss, UV-protected clear-coated finish. The shaped center section, molded edges and raised outer corners are designed to complement the wide and angular front profile of the Audi A5 S Line and S5 B9.

• Carbon fiber construction
• Visible woven carbon fiber pattern
• Gloss clear-coated exterior surface
• One-piece molded profile
• Vehicle-specific front bumper shape

Vehicle Fitment

Designed for the following listed applications with the matching factory front bumper:

• 2017–2019 Audi A5 B9 S Line
• 2017–2019 Audi S5 B9

Important fitment notice: Compatibility is determined by the front bumper design, not only by the model name or production year. Compare your bumper shape with the installed-car and product images before ordering.

Do not assume compatibility with Audi A5 base or non-S Line bumpers, Audi RS5, B8 or B8.5 models, B9.5 facelift models, or vehicles fitted with an aftermarket replacement bumper. Body style and regional bumper specifications should also be checked before installation.

Add-On Installation

This carbon fiber front lip installs beneath the factory front bumper as an add-on component. Position the complete lip on the vehicle before drilling or fastening, then check the center alignment, left and right bumper contact surfaces, wheel-side clearances and ground clearance.

Self-tapping screws are used for mounting according to the current product configuration. Professional installation is recommended to achieve accurate alignment and secure attachment. Do not complete the final installation until the full-width lip has been test-fitted across the complete bumper.

Before Ordering

Please confirm your vehicle year, model, trim and front bumper design before placing an order. If the bumper shape is unclear, send clear front and side-angle photos through our fitment support page for compatibility checking.