Range Rover Vogue L322 02+ - '2010' Supercharged Style Side Vent Covers (pair)

Range Rover L322 02+ - '2010' Supercharged Style Side Vent Covers (pair) [chrome]

Enhance your Range Rover L322 Vogue by fitting these latest design (2010+) Range Rover side vent assemblies. Supplied in the kit is a PAIR (left and right) of side vent assemblies brand new.

Although only fitted by Land Rover to the 2010+ on SUPERCHARGED models these vents can be fitted to earlier and lower specifications models.

There were 5 types of side vent fitted to the Range Rover L322 (Vogue Shape)

1) Early cars had the double fins
2) 06+ cars had the triple fins
3) 06+ Supercharged Supercharged side vents
4) 2010+ Supercharged side vents - this have the 3 'fins' at the top of the vent - this is what is listed here
5) 2012 Autobiography design pack - these had a different mesh pattern and the top 3 'fingers' are joined

Vents on all models are inter-changeable so you can fit these to your car if you have double or triple vents without a problem. We also have these available in black, silver and other colour coded finishes (see our other items).

See below for video fitting instructions - all you need is 10 minutes and a 10mm spanner.

These are not genuine items, however they are high quality items produced to be as close to original as possible in both quality and fit.

Fitting Details

• Open the bonnet of your car and undo the upper bolt (10mm spanner).
• The panel below the side vents can be pulled outwards (its only clipped in place) by pulling at the edge next to the door.
• Remove the lower bolt (10mm spanner).
• Fit new vents and press the panel firmly into place.
• A straightforward DIY operation with no drilling required.

This item will fit the following model/s:

• Range Rover Vogue/HSE (2002 - 2012)