Range Rover Vogue - Front/Rear Bumper Parking Sensor PDC Connectors (for "2010 upgrade/conversion")

Range Rover Vogue - Front/Rear Bumper Parking Sensor PDC Connectors (for "2010 upgrade/conversion")

These are the connectos you need to change on your Range Rover L322 if you are changing you bumpers to the 2010-12 type.

The early parking sensors were larger and will not fit in the new 2010-12 bumpers so you need to fit the new type sensors in the new bumper.

The new connectors and the old connectos both have 3 wires and they are both compatible with the PDC control module so all you need to do is cut the 3 wires and join the new connectors in the correct order (instructions provided).

This listing is for 4 connectors each with a short length of wire for you to solder to the original car loom - you will need 4 for the front bumper and if you are converting the rear bumper you will require 4 for the rear bumper conversion.

The sensors themselves are not included in this sale - see our related items for the actual sensors.

This item will fit the following model/s:

• This loom WILL fit a 2002-09 Range Rover Vogue fitted with a 2010+ front bumper with fog lights