Range Rover Evoque - Chrome Front Bonnet Lettering

Range Rover Evoque - Chrome Front Bonnet Lettering

Enhance your Range Rover Evoque by fitting these chrome letters to the bonnet of your vehicle. These are the same system and a similar size (though we do not guarantee that they are the same size) to the original Range Rover lettering and is a great way to update your new Evoque.

The Evoque is only supplied with one choice of lettering - silver (called 'Atlas' by Land Rover)

The area on the bonnet where the lettering is mounted is not flat it is CURVED and this lettering is curved to match the bonnet. This means the lettering will not stick up at the corners.

The letters come complete with automotive grade self adhesive tape pre-applied so you just need to peel off the backing film and stick them onto your car. These letters are made from ABS plastic (same as original Evoque lettering) with a chrome finish.

We also have these letters in chrome for the rear of the Evoque

These are not genuine Land Rover parts.

Fitting Details

• Position the templates over the original lettering and mark the edge location of the templates then remove templates.
• Remove the original silver lettering (use hot air to help soften the adhesive holding the original letters on).
• Clean the area with the pre-clean wipe provided.
• Put the templates back into position.
• Remove the liner from the adhesive tape on the rear of each letter and stick the letters to the vehicle.
• Fitting tip - Mark the position of your original letters before removing them to ensure the new letters are correctly located.

This item will fit the following model/s:

• Range Rover Evoque (2011 onwards)