Land Rover Discovery - Chrome 'LAND ROVER' Front Bonnet Lettering

Land Rover Discovery - Chrome 'LAND ROVER' Front Bonnet Lettering

Enhance your Land Rover Discovery by fitting these chrome letters to the bonnet of your vehicle. This is the same style and size as the original Land Rover lettering and is a great way to update your Discovery.

These replace the existing dull grey LAND ROVER letters and are the same thickness, size and dimensions as the letters used on the new Discovery models which is about 10% bigger than the original Discovery lettering. The extra size gives no problems with location and spacing.

The lettering is supplied complete with a template specifically for the Discovery bonnet to ensure correct spacing. You can see in the pictures the template positioned over the original lettering.

This listing is for the letters L A N R D O V E R with pre fitted automotive grade self adhesive tape.

These letters are made from ABS plastic (same as original lettering) with a chrome finish.

These are not genuine Land Rover parts, however they are a high quality aftermarket upgrade.

Fitting Details

• Position the templates over the original lettering and mark the edge location of the templates then remove templates. 
• Remove the original silver lettering (use hot air to help soften the adhesive holding the original letters on).
• Clean the area with the pre-clean wipe.
• Put the templates back into position.
• Remove the liner from the adhesive tape on the rear of each letter and stick the letters to the vehicle.
• Fitting tip - Mark the position of your original letters before removing them to ensure the new letters are correctly located.

This item will fit the following model/s:

• Land Rover Discovery (all models)