Land Rover Discovery - Black 'DISCOVERY 4' Tailgate Lettering

Land Rover Discovery - Black 'DISCOVERY 4' Tailgate Lettering

Enhance the rear of your Land Rover Discovery 4 by fitting these letters to the tailgate of your vehicle.

Now with free spacing template so you can get the correct spacing!

These replace the worn grey DISCOVERY 4 ( or 3 ) letters and are the same thickness, size and dimensions as the letters used on the new Discovery 3 and 4.

These letters are made from ABS plastic (same as original lettering) with a black painted finish

We also have this lettering available in Gloss Black / Silver / Chrome.

These are not genuine Land Rover parts, however they are a high quality aftermarket upgrade.

Fitting Details

• Position the templates over the original lettering and mark the edge location of the templates then remove templates. 
• Remove the original lettering (use hot air to help soften the adhesive holding the original letters on).
• Clean the area with the pre-clean wipe.
• Put the templates back into position.
• Remove the liner from the adhesive tape on the rear of each letter and stick the letters to the vehicle.
• Fitting tip - Mark the position of your original letters before removing them to ensure the new letters are correctly located.

This item will fit the following model/s:

• Land Rover Discovery (all models)